3024753 - 1008A46 cam shaft left rigid mount - r r

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

NameConnector
-Battery  A1B 
Drain the air conditioner coolant circuit  - 5040A10  Air conditioning refrigerant CIRCUIT - Draining and Refilling .Proceed with removal  - 4450B04  right front wheel r r .Proceed with removal  - 7055B54  under-engine guard - r r .Proceed with removal  - 7055B66  Engine compartment DUST SHIELD protection in right front wheel arch - R.R. .Proceed with removal  - 1092G10  single engine belt r r .Proceed with removal  - 5040A20  air conditioner compressor - r+r - includes fluid level check and top up if necessary .Proceed with removal  - 7055B91  Right front WHEEL ARCH LINER - R.R. .1. Undo the bolt (1a) and remove the lower bracket (1b) securing the power steering pipes.2. Release the engine oil pipes (2a) from the fastenings (2b).
1. Undo the bolts (1a) securing the engine oil/power steering system pipe bracket (1b) to the timing side rigid engine support.
Position a hydraulic jack under the engine.1. Undo the nut fixing the timing side rigid engine support to the flexible mounting.
1. Undo the nuts (1a) and remove the timing side rigid engine support (1b).
Refitting ( Removing ) 1. Refit the timing side rigid engine support (1a)and secure it tightening the nuts (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1bNutENGINE MOUNT TIMING SIDEM8(Engine crankcase side) 2.3 ÷ 2.8
1. Tighten the nut securing timing side rigid engine support to the flexible mounting to the recommended torque.

FasteningComponentØValue(daNm)
1NutENGINE MOUNT TIMING SIDEM10(Flexible mounting side) 4.5 ÷ 5.5
Remove the hydraulic jack from under the engine.
Tighten the bolts securing the engine oil/power steering system pipe mounting bracket to the timing side rigid engine support.Fasten the engine oil pipes using the bands.Place the power assisted steering system lower pipe mounting bracket back in its housing and fasten it using the bolt. Proceed with refitting  - 7055B91  Right front WHEEL ARCH LINER - R.R. .Proceed with refitting  - 5040A20  air conditioner compressor - r+r - includes fluid level check and top up if necessary .Proceed with refitting  - 1092G10  single engine belt r r .Proceed with refitting  - 7055B66  Engine compartment DUST SHIELD protection in right front wheel arch - R.R. .Proceed with refitting  - 7055B54  under-engine guard - r r .Proceed with refitting  - 4450B04  right front wheel r r .Fill the air conditioner coolant circuit  - 5040A10  Air conditioning refrigerant CIRCUIT - Draining and Refilling .Connect the negative (-) battery terminal.Remove the car from the ramps.