3024894 - 1084A42 engine oil pressure warning light switch - r + r

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal  - 7055B54  under-engine guard - r r .Proceed with removal  - 1084B30  engine oil filter r r .1. Disconnect the electrical connection from the engine oil pressure warning light switch.

	Name	Connector
1	Engine oil pressure sensor	K30

2. Undo and remove the engine oil pressure warning light switch. Refitting ( Removing ) Fit the engine oil pressure warning light switch in its seating and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	OIL PRESSURE W/L	M14	2.2 ÷ 2.6

Connect the electrical connection to the engine oil pressure warning light switch.Proceed with refitting  - 1084B30  engine oil filter r r .Connect the negative (-) battery terminal.Refill the engine oil lubrication system  - 0010T11  engine oil check level and top up .Proceed with refitting  - 7055B54  under-engine guard - r r .Remove the car from the ramps.