3024897 - 1084B30 engine oil filter r r
Removing ( Refitting ) Position the vehicle on the ramp.Proceed with removal - 7055B54 under-engine guard - r r .1. Undo the nut (1a) and remove the engine oil/power assisted steering fluid pipes lower mounting bracket (1b).
1. Undo the bolt (1a) and remove the power assisted steering system
pipes lower mounting bracket (1b).2. Release and remove the cartridge engine oil filter using a suitable
tool.
Recover the engine oil which comes out in a suitable container. |
Refitting
(
Removing
)
Lubricate the gasket with engine oil and
fit the engine oil filter, tightening fully by hand.Place the power assisted steering pipes
lower mounting bracket back in its housing and secure it using the
bolt.Place the engine oil/power assisted steering
fluid pipes lower mounting bracket back in its housing and secure it
using the nut.Refill the engine oil lubrication system
- 0010T11 engine oil check level and top up .Proceed with refitting - 7055B54 under-engine guard -
r r .Remove the car from the ramps.