3024909 - 1088D10 lower sleeve for coolant outlet from radiator - r + r
Removing ( Refitting ) Position the vehicle on the ramp.Proceed with removal - 7055B54 under-engine guard - r r .1. Loosen the band (1a) and disconnect the oil vapour recirculation pipe (1b) from the corrugated hose.2. Loosen the bands (2a) and remove the corrugated hose (2b), complete with resonator (2c).
1. Press the two rapid attachment clips, by hand, and disconnect
the lower coolant outlet hose from the radiator, radiator side.
Recover the coolant using a suitable container. |
1. Loosen the band, disconnect the radiator lower coolant outlet
hose, thermostat side and remove it.
Refitting
(
Removing
)
Place the radiator lower coolant outlet
hose in its housing, connect it to the thermostat and tighten the band. Connect the engine cooling system hose
to the radiator lower coolant outlet hose and tighten the band.Connect the rapid attachment for the lower
coolant outlet hose from the radiator, radiator side.Place the corrugated hose, complete with
resonator, back in its housing and tighten the bands.Connect the oil vapour recirculation pipe
to the corrugated hose and tighten the band.Refill the engine cooling system with coolant
- 0010T20 coolant change .Proceed with refitting - 7055B54 under-engine guard -
r r .Remove the car from the ramps.