3025194 - 3310A48 front brake disc - r r

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal  - 4450B10  Front WHEEL (one) - R.R. .Proceed with removal  - 3310A30  FRONT BRAKE CALIPER (one) - R.R. .1. Unscrew the pin (1a) and remove the front brake disc (1b). Refitting ( Removing ) 1. Refit the front brake disc (1a) in its seating and tighten its bolt (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Pin	FRONT BRAKE DISC.	M8	(Wheel hub side) 1.0 ÷ 1.4

Proceed with refitting  - 3310A30  FRONT BRAKE CALIPER (one) - R.R. .Top up the brake-clutch fluid level  - 0010T64  brake and or clutch fluid check level and top up as necessary .Bleed the air from the hydraulic braking system  - 0010T65  hydraulic brake system bleed air .Proceed with refitting  - 4450B10  Front WHEEL (one) - R.R. .Connect the negative (-) battery terminal.Remove the car from the ramps.