3025506 - 5510C46 flywheel side knock sensor - r+r

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with removal  - 4450B02  left front wheel r r .Proceed with removal  - 7055B65  Engine compartment DUST PROTECTION in left front wheel arch - R.R. .Proceed with removal  - 7055B54  under-engine guard - r r .Proceed with removal  - 5530B10  battery - r+r .Proceed with removal  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. .Proceed with removal  - 1008C10  power unit upper reaction link r r .Proceed with removal  - 1088D24  rigid pipe for coolant inlet to water pump - r + r .1. Undo the bolt (1a) and remove the flywheel side detonation sensor (1b).
Refitting ( Removing ) Place the flywheel side detonation sensor back in its housing and fix it tightening the bolt to the recommended torque.

FasteningComponentØValue(daNm)
-BoltFLYWHEEL SIDE KNOCK SENSORM8(Engine crankcase side) 2.3 ÷ 2.8
Proceed with refitting  - 1088D24  rigid pipe for coolant inlet to water pump - r + r .Proceed with refitting  - 1008C10  power unit upper reaction link r r .Proceed with refitting  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. .Proceed with refitting  - 5530B10  battery - r+r .Proceed with refitting  - 7055B65  Engine compartment DUST PROTECTION in left front wheel arch - R.R. .Proceed with refitting  - 4450B02  left front wheel r r .Refill the engine cooling system with coolant  - 0010T20  coolant change .Proceed with refitting  - 7055B54  under-engine guard - r r .Remove the car from the ramps.