1036E20 TIMING SHAFT OF ONE CYLINDER HEAD, LH OR RH - R R WITH CYLINDER HEAD REMOVED - Alfa - 147 - eLearn

) 1. Position the cylinder head (1a) in the vice, using tools (1b), 1 (c) and 1(d).

	Name	Country
1b	Mount	1.820.012.000

	Name	Country
1c	Mount	1.820.050.000

	Name	Country
1d	-	1.860.952.000

1. Undo the nuts (1a) and remove the bracket on the engine for the reaction rod (1b).

1. Undo the bolts (1a) and remove the camshaft caps (1b).2. Remove the camshafts.3. Remove the front camshaft oil seals.

) Place the camshafts back in their housings.Place the camshaft caps back in their housings in the sequence shown in the diagram.

Tighten the camshaft cap bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAMSHAFT CAPS/	M8	(Cylinder head side) 1.8 ÷ 2.0

1. Fit the camshaft front oil seals (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.860.948.000

1. Fit the bracket on the engine for the reaction rod (1a) and fix it tightening the nuts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Nut	REACTION LINK BRACKET ON ENGINE	M10	(Cylinder head side) 4.5 ÷ 5.5

Remove the cylinder head from the supporting tools.