3022640 - J20 REARSCREEN AND DOOR MIRROR DEFROSTING NOT WORKING

With the ignition on, when the heated rear window button is pressed, neither the rear window nor the door mirrors warm up properly
Results of the tests
1CHECKING FUSESAll OKProblems metOperation
Check the specific heated rear window and rearview mirror supply fuses on the underfacia junction unitContinue to Step 2Blown fusesBefore changing the part, seek the cause of the problem
2CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

Connect the equipment (Examiner or Examiner plus) to the diagnostic socket and check:

  • that there are no errors in the climate control unit
  • that the heated rear window switch changes over to the parameters environment
Continue to Step 3There are faults in the control unit.Continue according to the instructions for the diagnostic equipment.
When the heated rear window switch is operated, the displayed status (ON-OFF) does not changeReplace the climate control unit Op.   5040D15 
3CHECKING HEATED REAR WINDOW AND MIRROR POWER SUPPLYAll OKProblems metOperation

Operating the heated rear window switch, check:

Continue to Step 4Power supply is correctContinue to Step 4
Power supply not coming throughContinue to Step 5
4CHECKING DEMISTING COILAll OKProblems metOperation

Check:

Continue to Step 7Rear window heating element brokenReplace the rearscreen Op.   7035B14 
Mirror heating element brokenReplace the mirror(s) Op.   7005R30 
Earth connections not correct Restore connections See   E3030  HEATED REAR WINDSCREEN AND DOOR MIRROR DEFROSTING
5CHECK ON HEATED REAR WINDOWAll OKProblems metOperation

Verify:

Continue to Step 7Heated rear window faultReplace heated rear window
Heated rear window supply failureRestore connections See   E3030  HEATED REAR WINDSCREEN AND DOOR MIRROR DEFROSTING
Heated rear window earth failureContinue to Step 6
6CHECK ON UNDERFACIA JUNCTION UNITAll OKProblems metOperation

Verify:

Continue to Step 7Underfacia junction unit fault Replace underfacia junction unit Op.   5505A10 
7CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentFault persistsReplace the Body Computer Op.   5505A32  Search for the fault starting from another symptom'