3024731 - 0010T67 hydraulic clutch system bleed air

1. Connect the tool to the brake-clutch fluid reservoir.

NameCountry
1Brake/clutch bleeding equipment1.806.097.001
2. Remove protective cap (2a) and connect recovery device (2b) to the hydraulic clutch control actuator.3. Lift the retaining clip (3a) until the first click is heard and remove the pipe (3b) sufficiently to uncover the bleed hole.4. Slowly open the fluid reservoir cock.Wait until all the air contained in the hydraulic clutch disengagement system has come out.Fit the pipe fully home in its seat on the hydraulic clutch control actuator and secure with the retaining clip.Remove the protective cap.
Remove the collection system.Remove the bleed equipment.

NameCountry
-Brake/clutch bleeding equipment1.806.097.001
Check correct clutch disengagement and gear engagement.Check the fluid level in the brake - clutch reservoir is correct.