1008A44 REAR RIGID MOUNT - R R - Alfa - 147 - eLearn

3024752 - 1008A44 rear rigid mount - r r

) Place the car on a ramp. - 7055B54 under-engine guard - r rPosition a hydraulic lift under the oil sump.1. Undo the fixing nut (1a) and bolt (1b) and remove the rigid power unit rear reinforcement (1c).

1. Undo the nut fixing the rigid rear support to the mounting.2. Undo the fixing bolts (2a) and remove the power unit rear support (2b).

Refitting ( Removing

) Fit the power unit rear support.Tighten the bolts fixing the support to the differential to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	POWER UNIT RIGID REAR MOUNT	M12	6.8 ÷ 8.3

	Fastening	Component	Ø	Value(daNm)
-	Bolt	POWER UNIT RIGID REAR MOUNT	M16	10.8 ÷ 13.2

Tighten the bolts fixing the engine support to the flexible mounting to torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Fit the rigid support reinforcement and secure it to the mounting and the cylinder block/crankcase.Tighten the nut and the bolt fixing the reinforcement.

	Fastening	Component	Ø	Value(daNm)
-	Nut	POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD....	M12	(Flexible mounting) 7.9 ÷ 9.7

	Fastening	Component	Ø	Value(daNm)
-	Bolt	POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD....	M10	(Cylinder block/crankcase) 4.5 ÷ 5.5

Remove the hydraulic lift positioned under the oil sump. - 7055B54 under-engine guard - r rRemove the vehicle from the ramp.