1008B10 POWER UNIT FRONT MOUNT (TIMING SIDE) FLEXIBLE BLOCK - REPLACE - Alfa - 147 - eLearn

3024755 - 1008B10 power unit front mount (timing side) flexible block - replace

) Position the vehicle on the ramp. - 4450B04 right front wheel r r - 7055B54 under-engine guard - r r .Position a hydraulic jack under the engine.1. Undo the bolt securing the timing side rigid engine support to the flexible mounting.Lower the hydraulic jack as necessary.2. Undo the bolts (2a) and remove the flexible mounting for the power unit front support (2b).

Refitting ( Removing

) Place the flexible mounting for the power unit front support (1a) back in its housing and secure it by tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT RUBBER MOUNTS	M8	(Bodyshell side) 2.7 ÷ 3.4

Using the hydraulic jack, place the timing side rigid engine support in contact with the flexible mounting.Tighten the bolt securing timing side rigid engine support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ENGINE MOUNT TIMING SIDE	M12	(Flexible mounting side) 7.5 - 9.2

Remove the hydraulic jack from under the engine. - 4450B04 right front wheel r r - 7055B54 under-engine guard - r r .Remove the car from the ramp.