3024787 - 1028H20 piston with connecting rod - r r

Removing ( Refitting )  - 1008C10  power unit upper reaction link r r - 1016A10  sound-proofing cover - r + r - 1008C14  engine link bracket - r r - 4450B04  right front wheel r r - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 1092G10  single engine belt r r - 1092A10  Crankshaft services PULLEY - R.R. - 1060G80  ds electric injection control unit - r r - 1032B10  toothed timing belt - r + r for timing adjustment or replacement - 5530B10  battery - r+r - 1016C10  cylinder head - r + r and replace gasket - 1076B50  exhaust pipe attachment to engine - r + r - 1092G10  single engine belt r r - 2710A35  intermediate drive shaft mount - r r - 1020A20  crank case oil sump - r + r clean seals for sealant application1. Undo bolts (1a) and remove big end bearing cap (1b). then remove big end half-bearing (1c).
Lower the vehicle.1. Remove the connecting rod with the piston.2. Remove the big end bearing shell.
Refitting ( Removing ) 1. Fit the connecting rod - piston assembly and half-bearing (1a) using tool (1b).
Fit the connecting rod - piston assembly in the cylinder block/crankcase so that the number stamped on the small end is facing the inlet side.
Fit the big end half-bearing and tighten the cap bolts to torque.

FasteningComponentØValue(daNm)
-BoltCONNECTING ROD CAP FASTENERSM92.5 + 60˚
 - 1020A20  crank case oil sump - r + r clean seals for sealant application - 2710A35  intermediate drive shaft mount - r r - 1092G10  single engine belt r r - 1076B50  exhaust pipe attachment to engine - r + r - 1016C10  cylinder head - r + r and replace gasket - 5530B10  battery - r+r - 1032B10  toothed timing belt - r + r for timing adjustment or replacement - 1060G80  ds electric injection control unit - r r - 1092A10  Crankshaft services PULLEY - R.R. - 1092G10  single engine belt r r - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 4450B04  right front wheel r r - 1008C14  engine link bracket - r r - 1016A10  sound-proofing cover - r + r - 1008C10  power unit upper reaction link r r - 0010T20  coolant change - 0010T21  coolant check density and top up if necessary - 0010T11  engine oil check level and top up