3024813 - 1040A37 fuel filler pipe housing seal - r r

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with the removal  - 4450B11  WHEEL (one) rear - R.R. (Right side). Proceed with the removal  - 7055B43  REAR WHEEL ARCH liner (one), left or right - R.R. (Right side). 1. Undo the bolts fixing the fuel filler pipe to the bodyshell. Remove the fuel filler pipe cap.1. Position a hydraulic jack under the rear suspension crossmember.2. Undo the bolts (2a) and lower the rear suspension crossmember (2b), as necessary, using the hydraulic jack. 1. Remove the two clips protecting the fuel filler pipe. 1. Disengage the fuel filler pipe from the body as required to remove the fuel filler pipe housing seal. Refitting ( Removing ) Refit the fuel filler pipe housing seal.Refit the fuel filler pipe.Refit the two clips protecting the fuel filler pipe.Place the rear suspension crossmember back in its housing using the hydraulic jack and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR CROSS-BEAM	M10	(Bodyshell side) 5.8 ÷ 7.2

Remove the hydraulic jack from under the rear suspension crossmember.Tighten the fuel filler pipe retaining bolts.Replace the fuel filler cap in its housingProceed with the refitting  - 7055B43  REAR WHEEL ARCH liner (one), left or right - R.R. (Right side).Proceed with the refitting  - 4450B11  WHEEL (one) rear - R.R. (Right side).Remove the car from the ramp.