3025005 - 1020D30 oil seal cover, fly wheel side - r + r and replace seals

Removing ( Refitting )  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 1092G10  single engine belt r r - 2710A35  intermediate drive shaft mount - r r - 1020A20  crank case oil sump - r + r clean seals for sealant application1. Undo the bolts (1a) and remove the flywheel side oil sealling cover (1b). Refitting ( Removing ) Clean the contact surfaces between the crankcase sump and the flywheel side oil seal cover.Fit a new cover with built-in gasket using a special installer and and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1c	Bolt	FLYWHEEL SIDE COVER	M6	0.9

	Name	Country
-	Fitting tool	1.860.817.000

 - 1020A20  crank case oil sump - r + r clean seals for sealant application - 2710A35  intermediate drive shaft mount - r r - 1092G10  single engine belt r r - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R.