3026021 - 1088C32 thermostat unit - r + r with cylinder head removed
Removing
(
Refitting
)
1. Loosen the band (1a) and disconnect the pipe between the thermostat
and the heat exchanger (1b), heat exchanger side. 2. Undo the bolts (2a) and remove the thermostat (2b) complete with
pipe and sensor.3. Remove the gasket.
Refitting
(
Removing
)
Place the gasket back in its housing.Place the thermostat, complete with gasket,
pipes and sensor, back in its housing and tighten the bolts to the recommended
torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | THERMOSTAT | M8 | (Cylinder head side) 2.1 ÷ 2.6 |