3024776 - 1020D18 front crank shaft cover oil seal - replace

Removing ( Refitting ) Place the car on a ramp. - 1016A10  sound-proofing cover - r + r - 1008C10  power unit upper reaction link r r - 1008C14  engine link bracket - r r - 1060G80  ds electric injection control unit - r r - 4450B04  right front wheel r r - 7055B54  under-engine guard - r r - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 1092G10  single engine belt r r - 1092A10  Crankshaft services PULLEY - R.R. - 1032B10  toothed timing belt - r + r for timing adjustment or replacement - 1032B44  toothed drive pulley - r + r with timing belt removedRemove the oil seal from the housing in the front cover.
The operation of removing the oil seal destroys it, therefore it must always be replaced.
Refitting ( Removing ) 1. Fit a new oil seal (1a) by using tool (1b) to insert into its seat on the front cover.

NameCountry
1bFitting tool1.860.816.000
 - 1032B44  toothed drive pulley - r + r with timing belt removed - 1032B10  toothed timing belt - r + r for timing adjustment or replacement - 1092A10  Crankshaft services PULLEY - R.R. - 1092G10  single engine belt r r - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 7055B54  under-engine guard - r r - 4450B04  right front wheel r r - 1060G80  ds electric injection control unit - r r - 1008C14  engine link bracket - r r - 1008C10  power unit upper reaction link r r - 1016A10  sound-proofing cover - r + rRemove the vehicle from the ramp.