3025075 - 1084C20 radiant mass for engine oil cooling - r + r

Removing ( Refitting )  - 7055B54  under-engine guard - r r - 1084B30  engine oil filter r rPosition a suitable container for recovering the coolant fluid beneath the radiator.1. Disconnect the engine coolant inlet and outlet pipes from the oil cooling radiator.2. Unscrew retaining pin (2a) and remove oil cooling radiator (2b). Refitting ( Removing ) Position the oil cooling radiator on the oil pump front cover.Tighten the pin securing the oil cooling radiator to torque.

	Fastening	Component	Ø	Value(daNm)
-	Connector	OIL COOLING RADIATOR	M20	6

Connect the engine coolant inlet and outlet pipes to the oil cooling radiator.Check the amount of coolant present in the engine.Top if using the same coolant if necessary. - 1084B30  engine oil filter r r - 7055B54  under-engine guard - r r