3025219 - 3330B02 pedal assembly - r r

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

1. Undo the bolt (1a) and disconnect the steering column (1b) from the power assisted steering box pinion (1c).

The bolt is pretreated and cannot therefore be refitted.

Proceed with removal  - 5550D10  brake light switch - r+r .Release the electrical wiring from its attachments. Proceed with removal  - 1060G42  clutch pedal switch - r r .

	Name	Connector
1	Accelerator pedal potentiometer	K55

2. Disengage the clips (2a) and release the brake pump (2b) from the pedal.

Take care not to damage the retaining clips.

3. Remove the clip (3a) and release the rod for the clutch master cylinder (3b) from the pedal.4. Undo the nuts securing the pedal assembly. 1. Remove the complete pedal unit. Refitting ( Removing ) 1. Refit the complete pedal assembly in its seating and tighten the nuts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1	Nut	COMPLETE PEDAL ASSEMBLY	M8	(Bodyshell side) 1.8 ÷ 2.6

Connect the rod for the clutch master cylinder to the pedal and secure it using the clip.Refit the brake pump in its seating, connecting it to the brake pedal.Connect the electrical connection to the accelerator pedal potentiometer. Proceed with refitting  - 1060G42  clutch pedal switch - r r .