3330C10 (PUMP) - MASTER CYLINDER R.R. - Alfa - 147 - eLearn

3025230 - 3330C10 (PUMP) - MASTER CYLINDER R.R.

) Proceed with removal - 5530B10 battery - r+r .

When removing the battery, make sure also to disconnect the starter motor supply lead, shown in the figure, from the maxi fuse box.

Proceed with removal - 3330C30 brake fluid reservoir - r + r and wash inside .1. Undo the connectors (1a) and disconnect the rigid pipe between master cylinder and A.B.S. hydraulic control unit (1b), master cylinder side.2. Undo nuts (2a) and remove clutch master cylinder (2b).

Refitting ( Removing

) 1. Place the master cylinder (1a) back in its housing and fix it tightening the nuts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Nut	BRAKE MASTER CYLINDER (PUMP)	M8	(Brake servo side) 2.1 ÷ 2.9

2. Connect the rigid pipe from master cylinder to ABS hydraulic control unit, master cylinder side, and tighten the connectors (2b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2b	Connector	PIPE FROM PUMP TO HYDRAULIC CONTROL UNIT	M12	(Master cylinder side) 1.3 ÷ 1.5

Proceed with refitting - 3330C30 brake fluid reservoir - r + r and wash inside .Proceed with refitting - 5530B10 battery - r+r .