3330C30 BRAKE FLUID RESERVOIR - R + R AND WASH INSIDE - Alfa - 147 - eLearn

3025231 - 3330C30 brake fluid reservoir - r + r and wash inside

) Proceed with removal - 5530B10 battery - r+r .

When removing the battery, make sure also to disconnect the starter motor supply lead, shown in the figure, from the maxi fuse box.

Remove the brake/clutch fluid reservoir cap and drain the fluid using a suitable syringe, then retighten the cap. 1. Disconnect the electrical connection from the low brake-clutch fluid warning light switch.

	Name	Connector
1	Brake fluid level sensor (switch)	K25

1. Undo the bolt (1a) and raise the brake fluid reservoir (1b) as much as necessary, releasing it from the master cylinder. 2. Disconnect the flexible pipe from the reservoir to the clutch master cylinder, reservoir side.Remove the brake fluid reservoir.

Refitting ( Removing

) Wash the inside of the brake fluid reservoir.Connect the flexible pipe from the reservoir to the clurch master cylinder, reservoir side. Refit the brake fluid reservoir in its seating, connecting it to the master cylinder, then fix it with the bolt. Connect the electrical connection from the low brake-clutch fluid warning light switch. Bleed the air from the hydraulic braking system - 0010T65 hydraulic brake system bleed air .Proceed with refitting - 5530B10 battery - r+r .