3025259 - 3340B55 central brake pipe to lh - r r

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with removal  - 5530B10  battery - r+r .

When removing the battery, make sure also to disconnect the starter motor supply lead, shown in the figure, from the maxi fuse box.

Proceed with removal  - 4450B02  left front wheel r r .Proceed with removal  - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. .Proceed with removal  - 3340A13  abs central mount - r r .Proceed with removal  - 7055B90  Left front WHEEL ARCH LINER - R.R. .1. Undo the connector for the rigid pipe from the hydraulic control unit to the left front brake, flexible pipe side. 2. Working from the wheelarch, remove the rigid pipe from the hydraulic unit to the front left brake after releasing it from the attachments. Refitting ( Removing ) Place in its seating the rigid pipe from the hydraulic unit to the front left brake and secure it with its attachments.Tighten the connector on the rigid pipe from the hydraulic unit to the front left brake, flexible pipe side, to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Connector	PIPE FROM CONTROL UNIT TO FRONT BRAKES	M10	(Flexible pipe side) 1.3 ÷ 1.5

Proceed with refitting  - 7055B90  Left front WHEEL ARCH LINER - R.R. .Proceed with refitting  - 3340A13  abs central mount - r r .Proceed with refitting  - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. .Proceed with refitting  - 5530B10  battery - r+r .Bleed the air from the hydraulic braking system  - 0010T65  hydraulic brake system bleed air .Proceed with refitting  - 4450B02  left front wheel r r .Remove the car from the ramps.