3340B62 REAR CONNECTION CENTRAL PIPE - R R - Alfa - 147 - eLearn

3025261 - 3340B62 rear connection central pipe - r r

) Position the vehicle on the ramp.Proceed with removal - 5530B10 battery - r+r .

When removing the battery, make sure also to disconnect the starter motor supply lead, shown in the figure, from the maxi fuse box.

Proceed with removal - 4450B02 left front wheel r r .Proceed with removal - 3340A12 A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. .Proceed with removal - 3340A13 abs central mount - r r .Proceed with removal - 7055B90 Left front WHEEL ARCH LINER - R.R. .Release the rigid pipe from the hydraulic control unit to the rear brake pipe connector from the fastenings on the engine bulkhead.1. Remove the brake pipe protection.2. Undo the connector (2a) and remove the rigid pipe from the hydraulic unit to the connector on the pipes to the rear brakes (2b), releasing it from its attachments under the bodyshell.

Refitting ( Removing

) Refit in its seating the rigid pipe from the hydraulic unit to the connector on the pipes to the rear brakes, and secure it to the underbody.Tighten the connector on the rigid pipe from the hydraulic unit to the connector on the pipes to the rear brakes, connector side, to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Connector	RIGID BRAKING PIPE-CONT.UNIT/REAR BRAKES	M10	(Intermediate connector side) 1.3 ÷ 1.5

Refit the brake pipe protector in its seating.Secure the rigid pipe from the hydraulic unit to the rear brake pipes connector to the attachments on the engine compartment bulkhead.Proceed with refitting - 7055B90 Left front WHEEL ARCH LINER - R.R. .Proceed with refitting - 3340A13 abs central mount - r r .Proceed with refitting - 3340A12 A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. .Proceed with refitting - 5530B10 battery - r+r .Bleed the air from the hydraulic braking system - 0010T65 hydraulic brake system bleed air .Proceed with refitting - 4450B02 left front wheel r r .Remove the car from the ramps.