3025538 - 5530B26 lead between battery and starter motor - r+r

Removing ( Refitting ) Place the vehicle on a lift.Open the bonnet lid.1. Release the retainers (1a) and remove the cover (1b).
1. Disconnect the electrical connection.

NameConnector
1Battery  A1A 
1. Disconnect the cable retaining band.2. Open the cover (2a), on the starter motor, for the connection, releasing the retainers (2b). 3. Undo the nut.4. Remove the connection for the alternator cable.5. Remove the connection for the battery lead.

NameConnector
5Starter' motor  A20A 
6. Remove the cable between the battery and the starter motor.
Refitting ( Removing ) Check that the cable between the battery and the starter motor is not damaged and that the individual conductors are correctly secured to the connectors. If necessary, check the continuity.Position the connection for the battery lead.Position the connection for the alternator cable.Tighten the nut.Close the connector cover.Connect the cable retaining band.Connect the electrical connection.

FasteningComponentØValue(daNm)
-NutCABLE ON BATTERY CONTROL UNITM81.1
Refit the cover and attach the retainers.Close the bonnet lid and remove the vehicle from the lift.Check the operation of the systems involved.