3024723 - 0010T40 change manual gearbox oil

Position the vehicle on the ramp.Proceed with removal  Refer to op.. 7055B54  under-engine guard - r r .1. Withdraw the gearbox oil level dipstick.2. Undo the oil drain plug and drain the oil fully into a suitable container.
Do not disperse the oil into the environment, as indiscriminate dispersal of this product causes pollution.
1. Clean drain plugs (1a) and (1b) and tighten to the specified torque.

FasteningComponentØValue(daNm)
1aDrain plugGEAR CASING PADSM18(Differential side) 1.6 ÷ 2.6

FasteningComponentØValue(daNm)
1bDrain plugGEAR CASING PADSM22(Mechanical. gearbox. differential/ to engine..) support side 3.0 ÷4. 8
Refill the gearbox with the specified oil through the hole on the level dipstick.

TypeComponentNameQty.
-Oli [l]ENGINE LUBRICATION CIRCUITTUTELA CAR ZC 75 SYNTH2.1
The table shows the total quantity of oil present in the gearbox.
2. Check the oil level on the dipstick, then insert it fully home.
Proceed with refitting  Refer to op.. 7055B54  under-engine guard - r r .Remove the car from the ramps.