3025112 - 1820B38 hydraulic clutch actuator r r and bleed air with gearbox removed
Removing
(
Refitting
)
1. Undo the bolts (1a) and remove the hydraulic clutch actuator
(1b).
Refitting
(
Removing
)
Clean any residues of sealant
from the matching surfaces between the hydraulic clutch actuator
and the gearbox.Apply silicon sealant to the matching surface
of the hydraulic clutch actuator and the gearbox.Place the hydraulic clutch actuator back
in its housing and secure it by tightening the bolts to the recommended
torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | CLUTCH CONTROL HYDRAULIC ACTIVATOR | M8 | (Gearbox side) 1.0 |