3025750 - 7025A10 bonnet lid - square

 Refer to op.. 7025A12  Engine front sound insulation COVER - R.R. Refer to op.. 7025A14  Bonnet LID - R.R. Lift the bonnet lid.1. If necessary, adjust the buffer blocks.2. If necessary, adjust the lock position.  Refer to op.. 7025A34  bonnet lid lock (one) - r+r or repair . 1. If necessary, undo the hinge bolts and adjust the bonnet position. The arrows indicate possible movements.Tighten the hinge bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	BONNET LID	M6	0.8

If the adjustments described above are insufficient, adjust bonnet lid hinge position as described below. Refer to op.. 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (right and left). Refer to op.. 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. (right and left).1. Remove the soundproofing.2. Slacken the nuts (2a) securing the hinges (2b) and adjust the position until the bonnet is aligned. The arrows (2c) indicate the possible movements.3. Tighten the nuts.

	Fastening	Component	Ø	Value(daNm)
3	Nut	BONNET LID HINGES	M8	2.4

Touch up the paintwork in the hinge area.Fit the soundproofing in position. Refer to op.. 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. (right and left). Refer to op.. 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (right and left).  Refer to op.. 7025A14  Bonnet LID - R.R. Refer to op.. 7025A12  Engine front sound insulation COVER - R.R.