1040A37 FUEL FILLER PIPE HOUSING SEAL - R R - Alfa - 147 - eLearn

3024813 - 1040A37 fuel filler pipe housing seal - r r

) Position the vehicle on the ramp.Proceed with removal - 4450B08 right rear wheel r r .Proceed with removal - 7055B45 right hand rear supplementary wheel arch - r+r .Remove the fuel filler pipe cap.1. Undo the bolts fixing the fuel filler pipe to the bodyshell.

1. Position a hydraulic jack under the rear suspension crossmember.2. Undo the bolts (2a) and lower the rear suspension crossmember (2b), as necessary, using the hydraulic jack.

1. Remove the two clips protecting the fuel filler pipe.

1. Disengage the fuel filler pipe from the body as required to remove the fuel filler pipe housing seal.

Refitting ( Removing

) Refit the fuel filler pipe housing seal.Refit the fuel filler pipe.Refit the two clips protecting the fuel filler pipe.Place the rear suspension crossmember back in its housing using the hydraulic jack and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR CROSS-BEAM	M10	(Bodyshell side) 5.8 ÷ 7.2

Remove the hydraulic jack from under the rear suspension crossmember.Tighten the fuel filler pipe retaining bolts.Replace the fuel filler cap in its housingProceed with refitting - 7055B45 right hand rear supplementary wheel arch - r+r .Proceed with refitting - 4450B08 right rear wheel r r .Remove the car from the ramps.