3025116 - 1820B58 clutch hydraulic circuit vibration damper - r+r

Removing ( Refitting ) Proceed with removal  - 7025A12  Engine front sound insulation COVER - R.R. .Proceed with removal  - 7025A14  Bonnet LID - R.R. .Proceed with removal  - 1016A10  sound-proofing cover - r + r .Proceed with removal  - 5530B10  battery - r+r .Proceed with removal  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. .Remove the protective cap on the master cylinder bleed valve.Connect the collection system (pipe and reservoir) to the bleed valve on the clutch operating cylinder.Operate the clutch pedal until the brake/clutch reservoir is completely empty.1. Remove the split pin (1a) and disconnect the pipe between the vibration damper and the operating cyliner (1b), vibration damper side.2. Remove the split pin (2a) and disconnect the clutch hydraulic circuit vibration damper (2b), clutch master cylinder side. 3. Remove the clutch hydraulic circuit vibration damper (3a) with the pipes incorporated, after having released it from the band (3b). Refitting ( Removing ) Place the hydraulic clutch circuit vibration damper back in its housing and secure it using the band.Connect the clutch hydraulic circuit vibration damper, clutch master cylinder side and secure it using the split pin. Connect the pipe from the vibration damper to the operating cylinder, vibration damper side and secure it using the split pin.Bleed the air and top up the level in the hydraulic clutch system  - 0010T67  hydraulic clutch system bleed air .Bleed the air from the hydraulic braking system  - 0010T65  hydraulic brake system bleed air .Proceed with refitting  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. .Proceed with refitting  - 5530B10  battery - r+r .Proceed with refitting  - 1016A10  sound-proofing cover - r + r .Proceed with refitting  - 7025A14  Bonnet LID - R.R. .Proceed with refitting  - 7025A12  Engine front sound insulation COVER - R.R. .