5505A28 CONTAINER OF SUPPLEMENTARY JUNCTION UNIT IN ENGINE BAY - R R - Alfa - 147 - eLearn

3025483 - 5505A28 container of supplementary junction unit in engine bay - r r

) - 7025A12 Engine front sound insulation COVER - R.R. - 7025A14 Bonnet LID - R.R. Open the bonnet lid.1. Release the retainers (1a) and remove the cover (1b).2. Disconnect the electrical connection.

	Name	Connector
2	Battery earth	C1

3. Open the wiring retaining duct.4. Move the earth wiring away from the duct.

1. Release the control unit (1a) from the two side retainers (1b).

1. Lift up the control unit slightly and disconnect the only electrical connection shown.

	Name	Connector
1	Engine compartment junction unit	B1E

1. Move the control unit.2. Undo the nut.3. Remove the seal.4. Release the wiring from the control unit container.5. Remove the control unit container.

Refitting ( Removing

) Check that the additional junction unit container is not damaged.Position the container.Insert the wiring in the control unit container.Fit the seal.Tighten the nut.Connect the electrical connection.Position the control unit and attach it to the side retainers.Position the earth wiring in the duct and closed it.Connect the electrical connection.Close the cover and attach the retainers.Test the electrical system. - 7025A14 Bonnet LID - R.R. - 7025A12 Engine front sound insulation COVER - R.R.