1008A42 GEAR BOX LEFT RIGID MOUNT - R R - Alfa - 147 - eLearn

3024751 - 1008A42 gear box left rigid mount - r r

) Position the vehicle on the ramp.Proceed with removal - 7055B54 under-engine guard - r r .Proceed with removal - 1048B14 air delivery pipe between turbo charger and heat exchanger - replace .Position a hydraulic jack under the gearbox.1. Undo the nut (1a) and disconnect the earth lead (1b) from the gearbox side rigid power unit support.

	Name	Connector
1b	Battery earth	C1

2. Undo the bolts fixing the power unit gearbox side rigid support to the flexible mounting.3. Undo the bolts (3a) and remove the power unit gearbox side rigid engine mount (3b).

Refitting ( Removing

) 1. Refit the gearbox side power unit rigid support (1a) in its seating and tighten the bolts (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10	(Manual gearbox/differential side) 4.5 ÷ 5.5

2. Undo the bolt fixing the gearbox side rigid power unit support to the flexbile block to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2	-	-	-	-

3. Connect the earth lead (3a) to the gearbox side rigid power unit support and tighten the nut (3b).Remove the hydraulic jack from under the gearbox.

Proceed with refitting - 1048B14 air delivery pipe between turbo charger and heat exchanger - replace .Proceed with refitting - 7055B54 under-engine guard - r r .Remove the car from the ramps.