4130B34 SUPPLY PIPE FROM FLUID RESEVIOR TO POWER STEERING PUMP R R - Alfa - 147 - eLearn

3025298 - 4130B34 supply pipe from fluid resevior to power steering pump r r

) Position the vehicle on the ramp.Proceed with removal - 7025A12 Engine front sound insulation COVER - R.R. .Proceed with removal - 7025A14 Bonnet LID - R.R. .Proceed with removal - 1016A10 sound-proofing cover - r + r .Proceed with removal - 7055B54 under-engine guard - r r .Remove the power steering fluid reservoir cap and drain the fluid using a suitable syringe.Refit the brake fluid reservoir cap.1. Undo the bolts securing the power steering fluid reservoir.

1. Move the power assisted steering fluid reservoir away, placing it as illustrated in the diagram.2. Disconnect the rapid connector for the supply pipe from the fluid reservoir to the power assisted steering pump, reservoir side.

1. Loosen the band and disconnect the supply pipe from the fluid reservoir to the power assisted steering pump, power assisted steering pump side.

1. Remove the supply pipe from the fluid reservoir to the power assisted steering pump.

Refitting ( Removing

) Refit the feed pipe from fluid reservoir to power steering pump in its housing.Connect the supply pipe from the fluid reservoir to the power assisted steering pump, pump side and secure it using the band.Connect the rapid connector for the supply pipe from the power steering fluid reservoir to the pump, reservoir side.Refit in its seating the power steering fluid reservoir and secure it with its bolts.Refill the power assisted steering circuit using the recommended fluid.

	Type	Component	Name	Qty.
-	Oli [l]	POWER ASSISTED STEERING CIRCUIT	TUTELA GI/A	1.2

The table shows the total quantity of fluid present in the power assisted steering circuit.

Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times.Check and, if necessary, top up the fluid level in the reservoir.Remove the car from the ramps.Start the engine and carry out 4 - 5 full steering wheel turn cycles (right and left).Top up the fluid level in the reservoir.Proceed with refitting - 7055B54 under-engine guard - r r .Proceed with refitting - 1016A10 sound-proofing cover - r + r .Proceed with refitting - 7025A14 Bonnet LID - R.R. .Proceed with refitting - 7025A12 Engine front sound insulation COVER - R.R. .