3024776 - 1020D18 front crank shaft cover oil seal - replace

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

NameConnector
-Battery  A1B 
Proceed with removal  - 1008C10  power unit upper reaction link r r .Proceed with removal  - 1060G80  ds electric injection control unit - r r .Proceed with removal  - 4450B04  right front wheel r r .Proceed with removal  - 7055B54  under-engine guard - r r .Proceed with removal  - 7055B91  Right front WHEEL ARCH LINER - R.R. .Proceed with removal  - 1092G10  single engine belt r r .Proceed with removal  - 1092A10  Crankshaft services PULLEY - R.R. .Proceed with removal  - 1092G20  engine component single belt fixed tensioner - one - r + r .Proceed with removal  - 1032D12  timing system protective cover(s) - r + r .Proceed with removal  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .Proceed with removal  - 1032B44  toothed drive pulley - r + r with timing belt removed .Remove the crankshaft front cover oil seal.
take care not to damage the oil seal seat during removal. The operation of removing the oil seal destroys it, therefore it must always be replaced.
Refitting ( Removing ) 1. Refit a new front crankshaft front cover oil seal (1a) using tool (1b).

NameCountry
1bFitting tool1.821.247.000
Proceed with refitting  - 1032B44  toothed drive pulley - r + r with timing belt removed .Proceed with refitting  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .Proceed with refitting  - 1032D12  timing system protective cover(s) - r + r .Proceed with refitting  - 1092G20  engine component single belt fixed tensioner - one - r + r .Proceed with refitting  - 1092A10  Crankshaft services PULLEY - R.R. .Proceed with refitting  - 1092G10  single engine belt r r .Proceed with refitting  - 7055B91  Right front WHEEL ARCH LINER - R.R. .Proceed with refitting  - 7055B54  under-engine guard - r r .Proceed with refitting  - 4450B04  right front wheel r r .Proceed with refitting  - 1060G80  ds electric injection control unit - r r .Proceed with refitting  - 1008C10  power unit upper reaction link r r .Connect the negative (-) battery terminal.Remove the car from the ramps.