3024801 - 1032D12 timing system protective cover(s) - r + r
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	Position the vehicle on the ramp.Proceed with removal  - 7025A12  Engine front sound insulation
COVER - R.R. .Proceed with removal  - 7025A14  Bonnet LID - R.R. .Proceed with removal  - 1016A10  sound-proofing cover
- r + r .Ensure that the ignition key is in the
OFF position, then disconnect the negative battery terminal (-).
		)
	Position the vehicle on the ramp.Proceed with removal  - 7025A12  Engine front sound insulation
COVER - R.R. .Proceed with removal  - 7025A14  Bonnet LID - R.R. .Proceed with removal  - 1016A10  sound-proofing cover
- r + r .Ensure that the ignition key is in the
OFF position, then disconnect the negative battery terminal (-).|  | Name | Connector | 
|---|---|---|
| - | Battery | A1B | 


 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Place the upper protective timing covers
back in their housings and secure them using the bolts.Fit the lower protective timing cover and
secure using the bolts.Proceed with refitting  - 1092G20  engine component single
belt fixed tensioner - one - r + r .Proceed with refitting  - 1092A10  Crankshaft services PULLEY
- R.R. .Proceed with refitting  - 1092G10  single engine belt r r .Proceed with refitting  - 7055B91  Right front WHEEL ARCH
LINER - R.R. .Proceed with refitting  - 7055B54  under-engine guard -
r r .Proceed with refitting  - 4450B04  right front wheel r
r .Proceed with refitting  - 1060G80  ds electric injection control
unit - r r .Proceed with refitting  - 1008C10  power unit upper reaction
link r r .Connect the negative (-) battery terminal.Proceed with refitting  - 1016A10  sound-proofing cover
- r + r .Proceed with refitting  - 7025A14  Bonnet LID - R.R. .Proceed with refitting  - 7025A12  Engine front sound insulation
COVER - R.R. .Remove the car from the ramps.
		)
	Place the upper protective timing covers
back in their housings and secure them using the bolts.Fit the lower protective timing cover and
secure using the bolts.Proceed with refitting  - 1092G20  engine component single
belt fixed tensioner - one - r + r .Proceed with refitting  - 1092A10  Crankshaft services PULLEY
- R.R. .Proceed with refitting  - 1092G10  single engine belt r r .Proceed with refitting  - 7055B91  Right front WHEEL ARCH
LINER - R.R. .Proceed with refitting  - 7055B54  under-engine guard -
r r .Proceed with refitting  - 4450B04  right front wheel r
r .Proceed with refitting  - 1060G80  ds electric injection control
unit - r r .Proceed with refitting  - 1008C10  power unit upper reaction
link r r .Connect the negative (-) battery terminal.Proceed with refitting  - 1016A10  sound-proofing cover
- r + r .Proceed with refitting  - 7025A14  Bonnet LID - R.R. .Proceed with refitting  - 7025A12  Engine front sound insulation
COVER - R.R. .Remove the car from the ramps.