3025111 - 1820B30 OPERATING CYLINDER/CLUTCH HYDRAULIC ACTUATOR - R.R.
Removing
(
Refitting
)
Proceed with removal - 7025A12 Engine front sound insulation
COVER - R.R. .Proceed with removal - 7025A14 Bonnet LID - R.R. .Proceed with removal - 1016A10 sound-proofing cover
- r + r .Proceed with removal - 5530B10 battery - r+r .Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT
- R.R. .Remove the protective cap on the master
cylinder bleed valve.Connect the collection system (pipe and
reservoir) to the bleed valve on the clutch operating cylinder.Operate the clutch pedal until the brake-clutch
fluid reservoir is empty.1. Undo the connector (1a) and disconnect the pipe from the vibration
damper to the operating cylinder (1b), operating cylinder side.2. Remove the circlip (2a) and remove the master cylinder (2b) from
the support.
Refitting
(
Removing
)
Place the operating cylinder mounting back
in its housing and secure it using the bolts.1. Place the clutch operating cylinder (1a) back in its housing
and secure it to the mounting using the circlip (1b).2. Connect the pipe from the vibration damper to the operating cylinder
(2a), operating cylinder side and secure it tightening the connector
(2b) to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 2b | - | - | - | - |
