3025476 - 5050D20 headlamp washer pump - r+r

Removing ( Refitting ) Open the bonnet lid.  - 7025A12  Engine front sound insulation COVER - R.R. - 7025A14  Bonnet LID - R.R. 1. Undo the bolts fixing the coolant reservoir.2. Open the retaining band.3. Move the coolant reservoir.
Position a suitable container for collecting the windscreen washer reservoir fluid.1. Disconnect the electrical connection for the electric pump.

NameConnector
1Headlamp washer pump motor  N25 
2. Remove the electric pump from the reservoir and let the fluid drain into the container.3. Disconnect the fluid supply pipe, then recover the electric pump.
Refitting ( Removing ) Check that the electric pump is not damaged and, if necessary, conduct an electrical test on it.Connect the fluid supply pipe.Fit the electric pump in the reservoir.Connect the electrical connection to the electric pump.Position the coolant reservoir and secure it using the bolts.Repositin the retaining band.Refill the windscreen washer fluid reservoir.  - 7025A14  Bonnet LID - R.R. - 7025A12  Engine front sound insulation COVER - R.R. Close the bonnet lid and check the operation of the headlamp washers.