3025881 - 7050A26 Rear seat BACKREST COVER - R.R. with seat removed
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	 - 7050B10  l/h or r/h head restraint
(one) of rear seat - r+r - 7050B30  rear seat central armest r r (only
for the right side)1. Undo the bolt fixing the mounting ring.2. Remove the mounting ring.3. Release the retaining buttons using the special tool.
		)
	 - 7050B10  l/h or r/h head restraint
(one) of rear seat - r+r - 7050B30  rear seat central armest r r (only
for the right side)1. Undo the bolt fixing the mounting ring.2. Remove the mounting ring.3. Release the retaining buttons using the special tool.|  | Name | Country | 
|---|---|---|
| 3 | Scraper blade | 1.823.015.000 | 
|  | Name | Country | 
|---|---|---|
| 7 | Scraper blade | 1.823.015.000 | 




 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Check that the trim is undamaged.Fit the cover on the padding.Hook on the top retaining hooks.Fit the trim with padding and stake the
hooks securing the trim to the frame in the armrest compartment.Fit the cover along the whole perimeter.Fit the armrest on the retainers.Fit the armrest panel.Fit the head restraint tubes.Fit the seat anchorage bracket and fix
it with the bolts.Position the belt slide and do up the inner
retainer. Then secure with bolts.Position the squab protection and fix it
with the retaining buttons.1. Undo the side bolts (1a) of the lock, position the protection
(1b) then retighten the bolts.NOTE Make sure that the retainers (1c) of the protection (1b)
fit correctly in their seatings (1d) in the engagement assembly.
		)
	Check that the trim is undamaged.Fit the cover on the padding.Hook on the top retaining hooks.Fit the trim with padding and stake the
hooks securing the trim to the frame in the armrest compartment.Fit the cover along the whole perimeter.Fit the armrest on the retainers.Fit the armrest panel.Fit the head restraint tubes.Fit the seat anchorage bracket and fix
it with the bolts.Position the belt slide and do up the inner
retainer. Then secure with bolts.Position the squab protection and fix it
with the retaining buttons.1. Undo the side bolts (1a) of the lock, position the protection
(1b) then retighten the bolts.NOTE Make sure that the retainers (1c) of the protection (1b)
fit correctly in their seatings (1d) in the engagement assembly. 