3025029 - 1060E30 pressure pump pulley - r r

Removing ( Refitting ) Position the vehicle on the rampProceed with removal  - 1016A10  sound-proofing cover - r + r . Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal  - 1008C10  power unit upper reaction link r r . Proceed with removal  - 1060G80  ds electric injection control unit - r r . Proceed with removal  - 4450B04  right front wheel r r . Proceed with removal  - 7055B54  under-engine guard - r r . Proceed with removal  - 7055B91  Right front WHEEL ARCH LINER - R.R. . Proceed with removal  - 1092G10  single engine belt r r . Proceed with removal  - 1092A10  Crankshaft services PULLEY - R.R. . Proceed with removal  - 1092G20  engine component single belt fixed tensioner - one - r + r . Proceed with removal  - 1032D12  timing system protective cover(s) - r + r . Proceed with removal  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement . 1. Stop the pressure pump pulley from rotating using two bolts. 2. Undo the pressure pump pulley nut.Undo the two bolts fitted previously to stop the rotation of the pressure pump pulley. 1. Remove the pressure pump pulley (1a) using the tool (1b).

	Name	Country
1b	Extractor	1.860.854.001

Refitting ( Removing ) 1. Replace the pressure pump pulley in its housing.2. Stop the pressure pump pulley from rotating using two bolts. 3. Tighten the pressure pump pulley nut to torque.

	Fastening	Component	Ø	Value(daNm)
3	Nut	PRESSURE PUMP CONTROL PULLEY	M14	4.5 ÷ 5.5

Undo the two bolts fitted previously to stop the rotation of the pressure pump pulley. Proceed with refitting  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .Proceed with refitting  - 1032D12  timing system protective cover(s) - r + r .Proceed with refitting  - 1092G20  engine component single belt fixed tensioner - one - r + r .Proceed with refitting  - 1092A10  Crankshaft services PULLEY - R.R. .Proceed with refitting  - 1092G10  single engine belt r r .Proceed with refitting  - 7055B91  Right front WHEEL ARCH LINER - R.R. .Proceed with refitting  - 7055B54  under-engine guard - r r .Proceed with refitting  - 4450B04  right front wheel r r .Proceed with refitting  - 1060G80  ds electric injection control unit - r r .Proceed with refitting  - 1008C10  power unit upper reaction link r r .Connect the negative (-) battery terminalProceed with refitting  - 1016A10  sound-proofing cover - r + r .Remove the car from the ramps.