1064A28 SOLENOID VALVE FOR TURBOCHARGER VANE ACTUATOR - R.R. - Alfa - 147 - eLearn

3025059 - 1064A28 SOLENOID VALVE FOR TURBOCHARGER VANE ACTUATOR - R.R.

) Position the vehicle on the ramp.Proceed with removal - 7025A12 Engine front sound insulation COVER - R.R. .Proceed with removal - 7025A14 Bonnet LID - R.R. .Proceed with removal - 1016A10 sound-proofing cover - r + r .Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 7055B54 under-engine guard - r r .1. Disconnect the vacuum pipes from the solenoid valve for the turbocharger vanes actuator.2. Disconnect the electrical connection from the turbocharger vane actuator solenoid.

	Name	Connector
2	Variable geometry turbine solenoid valve	L36

3. Undo the nuts (3a) and remove the turbocharger vane position actuator solenoid valve (3b).

Refitting ( Removing

) Fit the turbocharger vane actuator solenoid back in its housing and fix it using the nuts.Connect the electrical connection to the turbocharger vane actuator solenoid.Connect the vacuum pipes to the solenoid valve for the turbocharger vanes actuator.Proceed with refitting - 7055B54 under-engine guard - r r .Connect the negative (-) battery terminal.Proceed with refitting - 1016A10 sound-proofing cover - r + r .Proceed with refitting - 7025A14 Bonnet LID - R.R. .Proceed with refitting - 7025A12 Engine front sound insulation COVER - R.R. .Remove the car from the ramps.