3025423 - 5040A73 compressor inlet pipe - r r

Removing ( Refitting ) Observe the following precaution.
Follow the safety instructions ( See subassembly 5040   AIR CONDITIONING CASING AND COMPONENTS ).
 - 7025A12  Engine front sound insulation COVER - R.R. - 7025A14  Bonnet LID - R.R.Drain the coolant ( - 0010T84  coolant for air conditioning system dehydrate and recharge ). - 7055B54  under-engine guard - r r - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 7210E10  R.R. FRONT BUMPER
Seal the housing for the drier filter cartridge using a suitable plug to prevent dampness and impurities from entering the system.
1. Working in front of the right front wheel, undo the bolts fixing the air duct.2. Remove the air duct.
1. Disconnect the pipe connector from the condenser.
Seal the disconnected connectors, using suitable plugs, to prevent humidity and impurities from entering the system.
1. Disconnect the intermediate connector (1a) and the connector for the pipe (1b) from the compressor.2. Remove the pipe
Refitting ( Removing ) Check that the pipe is not damaged or cracked.Position the pipe.
Replace the O-rings for the connectors. Only use green coloured seals, resistant to R134A refrigerant. Lubricate the thread of the connectors using anti-freeze.
Connect the pipe connectors and tighten the bolts and the nut.

FasteningComponentØValue(daNm)
-BoltCOOLANT SYSTEM FITTINGSM60.9

FasteningComponentØValue(daNm)
-NutCOOLANT SYSTEM FITTINGSM60.9
Place the air duct in position and secure it using the bolts. - 7210E10  R.R. FRONT BUMPER - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 7055B54  under-engine guard - r rRepressurize using coolant fluid ( - 0010T84  coolant for air conditioning system dehydrate and recharge ). - 7025A14  Bonnet LID - R.R. - 7025A12  Engine front sound insulation COVER - R.R.