3025427 - 5040B14 air conditioner system multi-level pressure switch - r+r

Removing ( Refitting )  - 7055B54  under-engine guard - r r1. Disconnect the electrical connection.

	Name	Connector
1	4 stage pressure switch	K10

2. Undo and remove the multi-stage pressure switch. Refitting ( Removing ) Check that the pressure switch is not damaged.Tighten the multi-stage pressure switch in its housing.

	Fastening	Component	Ø	Value(daNm)
-	-	Multistage pressure switch	M10 x 1	0.8

Connect the electrical connection. - 7055B54  under-engine guard - r r Removing ( Refitting )  - 7055B54  under-engine guard - r r - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 7210E10  R.R. FRONT BUMPER1. Working at the front of the vehicle on the right hand side, disconnect the electrical connection.

	Name	Connector
1	4 stage pressure switch	K10

2. Undo and remove the multi-stage pressure switch. Refitting ( Removing ) Check that the pressure switch is not damaged.Tighten the multi-stage pressure switch in its housing.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	COOLANT SYSTEM FITTINGS	M10 x 1	0.8

Connect the electrical connection. - 7210E10  R.R. FRONT BUMPER - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 7055B54  under-engine guard - r r