3362908 - 4110A46 INTERMEDIATE SHAFT CONNECTED TO STEERING BOX - R.R.
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	 - 5530B56  BATTERY DRIP TRAY COVER
- R.R.
                                           .
                                       Disconnect the battery negative terminal.
		)
	 - 5530B56  BATTERY DRIP TRAY COVER
- R.R.
                                           .
                                       Disconnect the battery negative terminal.|  | Wait at least 20 seconds after switching off the engine before disconnecting the battery, to allow the electric steering system to complete its switch-off procedure. | 
|  | Closely follow the safety regulations established for this operation ( See assembly 5580C air bag system ). | 

 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Position and fix the steering
column shaft to the electric steering device, tightening the bolt
to the specified torque.
		)
	Position and fix the steering
column shaft to the electric steering device, tightening the bolt
to the specified torque.|  | The intermediate shaft fork must be inserted fully in the electric steering device output shaft only after the lock nut has been withdrawn from its seating. The bolt must be inserted correctly inside its seating after the fork has been fitted in the output shaft of the electric steering device. If the intermediate shaft fork is not correctly fitted on the output shaft or the safety bolt is not correctly positioned in its seating, these components could become disconnected and there could be a loss of steering. | 
|  | Fastening | Component | Ø | Value(daNm) | 
|---|---|---|---|---|
| - | - | - | - | - |