4450C10 FRONT PILLAR (ONE), L/H OR R/H COMPLETE WITH WHEEL HUB - R+R WITH WHEEL REMOVED - CHECK WHEEL GEOMETRY SEPARATELY - Fiat - STILO - eLearn

3362956 - 4450C10 front pillar (one), l/h or r/h complete with wheel hub - r+r with wheel removed - check wheel geometry separately

) 1. Remove the two bevels and undo the nut securing the drive shaft to the front steering knuckle.

- 3310A50 front brake discs r r1. Undo the nut (1a) and disconnect the power steering box rod (1b) from the front steering knuckle using the tool (1c).

	Name	Country
-	Extractor	1.847.038.000

1. Undo the bolt (1a) and disconnect the lower track control arm (1b) from the front steering knuckle.2. Undo the bolts securing the shock absorber to the steering knuckle.3. Remove the front steering knuckle complete with wheel hub.

Refitting ( Removing

) Replace the steering knuckle complete with wheel hub in its housing and fix it to the shock absorber, tightening the bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT HUB STEERING KNUCKLE.	M10	6.7

Replace the steering knuckle complete with wheel hub in its housing and fix it to the shock absorber, tightening the bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	-	FRONT HUB STEERING KNUCKLE.	M12	9.5

Connect the lower track control arm to the front steering knuckle and fix it by tightening the bolt to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT HUB STEERING KNUCKLE.	M10	7

Connect the power steering box rod to the front steering knuckle and fix it by tightening the nut to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	FRONT HUB STEERING KNUCKLE.	M10	3.8

- 3310A50 front brake discs r r1. Tighten the nut (1a) fixing the wheel hub to the drive shaft to the recommended torque, using the angle tightening tool (1b).

	Fastening	Component	Ø	Value(daNm)
-	Nut	DRIVESHAFT	M24	7 + 62°

	Name	Country
-	Protractor	1.895.897.000

Stake the nut collar.