3362386 - 1004D10 POWER UNIT (MANUAL GEARBOX), REMOVED, DISMANTLE AND REASSEMBLE

Removing ( Refitting ) 1. Undo the bolt fixing the gearbox to the cylinder block/crankcase (inner side).
1. Undo the nut fixing the gearbox to the cylinder block/crankcase (inner side).
1. Disconnect the electrical connection for the reversing light switch.
DescriptionConnector
1Reversing lights switchI020
2. Undo the retaining bolts (2a) and remove the gearbox (2b).
Refitting ( Removing ) 1. Place the gearbox in position on the cylinder block/crankcase (1a) and tighten the fixing bolts (1b) to torque.
Value daNmFasteningComponentØ  
1b6Bolt--
2. Connect the electrical connection for the reversing light switch.
DescriptionConnector
2Reversing lights switchI020
1. Tighten the nut fixing the gearbox to the cylinder block/crankcase (inner side) to torque.
Value daNmFasteningComponentØ  
16Nut--
1. Tighten the bolt fixing the gearbox to the cylinder block/crankcase (inner side) to torque.
Value daNmFasteningComponentØ  
16Bolt--