1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R - Fiat - STILO - eLearn

3362489 - 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R

) Disconnect the negative battery terminal.Position the vehicle on a lift.Raise the lift.1. Disconnect the electrical connection for the Lambda sensor.

	Description	Connector
1	Lambda sensor downstream of the post-converter	K017

2. Undo the nuts fixing the centre section of the exhaust pipe to the catalytic converter.

1. Undo the nuts fixing the centre section of the exhaust pipe to the flange joined to the rear section.

1. Remove the centre section of the exhaust pipe.Remove the seals.

Refitting ( Removing

) 1. Place the centre section of the exhaust pipe in position with the gaskets.

1. Tighten the nuts fixing the centre section of the exhaust pipe to the flange joined to the rear section to torque.

	Value daNm	Fastening	Component	Ø
1	2.5	Nut	-	-

1. Tighten the nuts fixing the centre section of the exhaust pipe to the catalytic converter to torque.

	Value daNm	Fastening	Component	Ø
1	2.5	Nut	-	-

2. Connect the electrical connection for the Lambda sensor.

	Description	Connector
2	Lambda sensor downstream of the post-converter	K017

Lower the lift.Remove the vehicle from the lift.Connect the negative battery terminal.