3362494 - 1080B95 REAR LAMBDA SENSOR TO CATALYTIC CONVERTER - R.R

Removing ( Refitting ) Disconnect the negative battery terminal.Position the vehicle on a lift.Raise the lift.1. Disconnect the electrical connection for the Lambda sensor.

	Description	Connector
1	Lambda sensor downstream of the post-converter	K017

2. Unscrew and remove the rear lambda sensor from the catalytic converter. Refitting ( Removing ) 1. Tighten the Lambda sensor to torque.

	Value daNm	Fastening	Component	Ø
1	4	Sensor	-	-

2. Connect the electrical connection for the Lambda sensor.

	Description	Connector
2	Lambda sensor downstream of the post-converter	K017

Lower the lift.Remove the vehicle from the lift.Connect the negative battery terminal.