3362564 - 1056B90 SYSTEM CABLE LOOM - R.R.

Removing ( Refitting ) Disconnect the negative battery terminal.1. Disconnect the electrical connection for the detonation sensor.

	Description	Connector
1	Detonation sensor	K50

2. Disconnect the electrical connection for the PDA position sensor.

	Description	Connector
2	PDA solenoid valve	L13b

3. Undo the bolts and disconnect the earths on the engine.

	Description	Connector
3	Earth on engine	C40

1. Disconnect the electrical connection for the PDA electropneumatic valve.

	Description	Connector
1	PDA solenoid valve	L13A

2. Disconnect the electrical connection for the fuel vapour recovery solenoid valve.

	Description	Connector
2	Fuel vapour recovery solenoid valve	L10

3. Disconnect the electrical connection for the engine coupling.

	Description	Connector
3	Engine/i.e. coupling	D24

    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.1. Disconnect the electrical connection for the timing sensor.

	Description	Connector
1	Timing sensor	K47

1. Disconnect the electrical connection for the air conditioning compressor engagement electromagnet.

	Description	Connector
1	Air conditioning compressor engagement electro-magnet	L20

1. Disconnect the electrical connection for the engine oil pressure warning light switch.

	Description	Connector
1	Engine oil pressure sensor (switch)	K30

1. Disconnect the electrical connection for the throttle casing actuator.

	Description	Connector
1	Integrated throttle casing actuator	N75

2. Disconnect the electrical connection on the control unit.

	Description	Connector
1	Engine management control unit	M10A

1. Disconnect the electrical connection for the sensor.

	Description	Connector
1	Air pressure - temperature sensor	K44

1. Disonnect the electrical connection for the EGR solenoid valve.

	Description	Connector
1	EGR solenoid valve	L30

1. Disconnect the electrical connection for the ignition coils.

	Description	Connector
1	Ignition coil	A30

2. Disconnect the electrical connection for the coupling.

	Description	Connector
2	Engine cables/engine services cable coupling	D29

1. Disconnect the electrical connection for the rpm sensor.

	Description	Connector
1	Rpm sensor	K46

1. Disconnect the electrical connection for the Lambda sensor.

	Description	Connector
1	Lambda sensor on pre-catalyzer	K15

1. Disconnect the electrical connection for the Lambda sensor.

	Description	Connector
1	Lambda sensor downstream of the post-converter	K17

- Release the wiring ducts from the tappet cover.1. Remove the engine wiring. Refitting ( Removing ) 1. Position the engine wiring. Secure the wiring ducts to the tappet cover.1. Connect the electrical connection for the Lambda sensor.

	Description	Connector
1	Lambda sensor downstream of the post-converter	K17

1. Connect the electrical connection for the Lambda sensor.

	Description	Connector
1	Lambda sensor on pre-catalyzer	K15

1. Connect the electrical connection for the rpm sensor.

	Description	Connector
1	Rpm sensor	K46

1. Connect the electrical connection for the ignition coils.

	Description	Connector
1	Ignition coil	A30

2. Connect the electrical connection for the coupling.

	Description	Connector
2	Engine cables/engine services cable coupling	D29

1. Connect the electrical connection for the EGR solenoid valve.

	Description	Connector
1	EGR solenoid valve	L30

1. Connect the electrical connection for the sensor.

	Description	Connector
1	Air pressure - temperature sensor	K44

1. Connect the electrical connection for the throttle casing actuator.

	Description	Connector
1	Integrated throttle casing actuator	N75

2. Disconnect the electrical connection on the control unit.

	Description	Connector
1	Engine management control unit	M10A

1. Connect the electrical connection for the engine oil pressure warning light switch.

	Description	Connector
1	Engine oil pressure sensor (switch)	K30

1. Connect the electrical connection for the air conditioning compressor engagement electromagnet.

	Description	Connector
1	Air conditioning compressor engagement electro-magnet	L20

1. Connect the electrical connection for the timing sensor.

	Description	Connector
1	Timing sensor	K47

    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.1. Connect the electrical connection for the PDA electropneumatic valve.

	Description	Connector
1	PDA solenoid valve	L13A

2. Connect the electrical connection for the fuel vapour recovery solenoid valve.

	Description	Connector
2	Fuel vapour recovery solenoid valve	L10

3. Connect the electrical connection for the engine coupling.

	Description	Connector
3	Engine/i.e. coupling	D24

1. Connect the electrical connection for the detonation sensor.

	Description	Connector
1	Detonation sensor	K50

2. Disconnect the electrical connection for the PDA position sensor.

	Description	Connector
2	PDA solenoid valve	L13B

3. Connect the earths to the engine and tighten the fixing bolts.

	Description	Connector
3	Earth on engine	C40

Connect the negative battery terminal.