3362589 - 1036C10 CAMSHAFTS IN CAMSHAFT HOUSING - R.R - INCLUDES CAMSHAFT HOUSING REPLACEMENT, IF NECESSARY

Removing ( Refitting )     Op. 4450B04 RIGHT FRONT WHEEL - R.R    Op. 1092G10 SINGLE ENGINE BELT - R.R    Op. 1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONING    Op. 1092B82 AUXILARY BELT MOVING TENSIONER (ONE) -R+R    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE    Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1032B14 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT VERSIONS WITH AIR CONDITIONER    Op. 5510C14 IGNITION COIL/S - R+R    Op. 1016A20 SINGLE TAPPET COVER -R.R AND REPLACE GASKET    Op. 1032B53 DRIVEN TOOTHED PULLEY (ONE) - R.R. FOR VERSIONS WITH AIR CONDITIONING[both]    Op. 1032C19 MOVING TIMING BELT TENSIONER - R.R. FOR VERSIONS WITH AIR CONDITIONING1. Undo the guard fixing bolts.Move the guard slightly aside.2. Disconnect the electrical connection (2a) for the timing sensor and remove the guard (2b).
DescriptionConnector
2aTiming sensorK047
Carry out the same operations for both the inlet and the exhaust shafts.Mark the position of bearing caps and the shafts before dismantling.1. Loosen the bolts fixing the bearing caps.2. Remove the main journal caps.
1. Remove the camshaft and oil seal.
Refitting ( Removing ) 1. Fit the camshaft and oil seal.
1. Place the bearing caps in position.2. Tighten the fixing bolts.
1. Fit the guard (1a) and connect the electrical connection (1b) for the timing sensor.
DescriptionConnector
1bTiming sensorK047
2. Tighten the guard fixing bolts.
    Op. 1032C19 MOVING TIMING BELT TENSIONER - R.R. FOR VERSIONS WITH AIR CONDITIONING    Op. 1032B53 DRIVEN TOOTHED PULLEY (ONE) - R.R. FOR VERSIONS WITH AIR CONDITIONING[both]    Op. 1016A20 SINGLE TAPPET COVER -R.R AND REPLACE GASKET    Op. 5510C14 IGNITION COIL/S - R+R    Op. 1032B14 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT VERSIONS WITH AIR CONDITIONER    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1092B82 AUXILARY BELT MOVING TENSIONER (ONE) -R+R    Op. 1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONING    Op. 1092G10 SINGLE ENGINE BELT - R.R    Op. 4450B04 RIGHT FRONT WHEEL - R.R