3362634 - 1036H10 VALVE TAPPETS - CHECK AND ADJUST CLEARANCE, IF NECESSARY

Removing ( Refitting )     Op. 4450B04 RIGHT FRONT WHEEL - R.R    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 1092G10 SINGLE ENGINE BELT - R.R    Op. 1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONING    Op. 1092B82 AUXILARY BELT MOVING TENSIONER (ONE) -R+R    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE    Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1032B14 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT VERSIONS WITH AIR CONDITIONER    Op. 5510C14 IGNITION COIL/S - R+R    Op. 1016A20 SINGLE TAPPET COVER -R.R AND REPLACE GASKET    Op. 1032B53 DRIVEN TOOTHED PULLEY (ONE) - R.R. FOR VERSIONS WITH AIR CONDITIONING[both]1. Measure the clearance between the tappets and the cams using a feeler gauge.

	Subject	Value
-	Inlet tappet clearance (mm)	0.21 - 0.29(0.25 mm nominal)

	Subject	Value
-	Exhaust tappet clearance (mm)	0.27 - 0.35(0.30 mm nominal)

If the tappet clearance is not within the recommended tolerance, remove the fixing caps and the camshaft concerned and replace the cups selecting the size according to the required clearance.

	Subject	Value
-	Cup classification	Size (mm)
	04	3.030 - 3.050
	08	3.070 - 3.090
	12	3.110 - 3.130
	16	3.150 - 3.170
	20	3.190 - 3.210
	24x	3.230 - 3.244
	27x	3.258 - 3.272
	30x	3.286 - 3.300
	32x	3.314 - 3.328
	35x	3.342 - 3.356
	38x	3.370 - 3.384
	41x	3.398 - 3.412
	43x	3.426 - 3.440
	47	3.460 - 3.480
	51	3.500 - 3.520
	55	3.540 - 3.560
	59	3.580 - 3.600

Check the clearance once again after having replaced the cups. Refitting ( Removing )     Op. 1032B53 DRIVEN TOOTHED PULLEY (ONE) - R.R. FOR VERSIONS WITH AIR CONDITIONING[both]    Op. 1016A20 SINGLE TAPPET COVER -R.R AND REPLACE GASKET    Op. 5510C14 IGNITION COIL/S - R+R    Op. 1032B14 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT VERSIONS WITH AIR CONDITIONER    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1092B82 AUXILARY BELT MOVING TENSIONER (ONE) -R+R    Op. 1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONING    Op. 1092G10 SINGLE ENGINE BELT - R.R    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 4450B04 RIGHT FRONT WHEEL - R.R