3363562 - 1028H54 PISTON WITH CONNECTING ROD - DISMANTLING AT THE BENCH

Removing ( Refitting ) 1. Place the piston complete with connecting rod in the press using the tool (1a) and the adaptor (1b).
DescriptionCodeFunction
1aPiston support base1.860.935.000Removing-refitting gudgeon pin
DescriptionCodeFunction
1bAdapator2.000.006.200Removing-refitting gudgeon pin
2. Remove the gudgeon pin (2b) using a suitable tool (2a).3. Remove the connecting rod (3a) from the piston (2b).
Refitting ( Removing ) 1. Place the connecting rod in the vice protecting the contact surfaces.Heat the big end using a drier.2. Position the piston (2a) and fit the gudgeon pin (2b) in the big end using the special tool (2c) positioning the reference (2d) on the connecting rod in the opposite direction to the arrow (2e) stamped on the piston.
DescriptionCodeFunction
2cFitting tool2.000.003.800Fitting gudgeon pin