192004488 - 1072B51 AIR INTAKE CHAMBER - R.R. FOR VERSIONS WITH AIR CONDITIONING

Removing ( Refitting )     Op. 1048A69 RIGID PIPE BETWEEN AIR FILTER AND THROTTLE CASING WITH BUILT IN RESONATOR - R.R    Op. 1056B14 THROTTLE CASE - R + ROp. 5505A55 ENGINE MANAGEMENT CONTROL UNIT DIGITAL NETWORK NODE - R.R. 1. Disconnect the oil vapour recovery pipe from the tappet cover and remove it.2. Adjust the rapid connector (2a) and disconnect the fuel pipe (2b) from the fuel manifold.3. Adjust the rapid connector (3a) and disconnect the fuel vapour recovery pipe (3b) from the intake manifold.4. Disconnect the electrical connection for the fuel vapour recovery solenoid valve.
DescriptionConnector
4Fuel vapour recovery solenoid valveL010
5. Disconnect the vacuum intake pipe from the air capacity chamber.6. Disconnect the electrical connection for the air temperature/pressure sensor.
DescriptionConnector
6Air pressure - temperature sensorK044
1. Disconnect the single-acting valve from the brake servo.
1. Undo the fixing bolts (1a) and remove air capacity chamber (1b).
Refitting ( Removing ) 1. Place the air chamber (1a) in position and tighten the fixing bolts (1b).
1. Connect the single-acting valve to the brake servo.
1. Connect the oil vapour recovery pipe to the tappet cover.2. Connect the fuel pipe (2a) to the fuel manifold using the rapid connector (2b).3. Connect the fuel vapour recovery pipe (3a) to the intake manifold using the rapid connector (3b).4. Connect the electrical connection for the fuel vapour recovery solenoid valve.
DescriptionConnector
4Fuel vapour recovery solenoid valveL010
5. Connect the vacuum intake pipe to the air capacity chamber.6. Connect the electrical connection for the air temperature/pressure sensor.
DescriptionConnector
6Air pressure - temperature sensorK044
Op. 5505A55 ENGINE MANAGEMENT CONTROL UNIT DIGITAL NETWORK NODE - R.R.    Op. 1056B14 THROTTLE CASE - R + R    Op. 1048A69 RIGID PIPE BETWEEN AIR FILTER AND THROTTLE CASING WITH BUILT IN RESONATOR - R.R